View LM6302FWE_156598.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
KAOHSIUNG FACTORY : NO. 18 Ta-Yeh St., Ta-Fa Industrial Park, Ta-Liao Hsiang, Kaohsiung Hsien 831, TAIWAN , R.O.C.
TEL : (07) 788-6800 FAX : (07) 788-6806~8
PART NO : LM6302FWE FOR MESSRS : CONTENTS
NO.
1. 2. 3. 4. 5. 6. 7. 8 9. 10. COVER RECORD OF REVISION
GENERAL SPECIFICATION
ITEM
PAGE
1 2 3 4 5 6~7 8 9~10 11~12 13
ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS OPTICAL CHARACTERISTICS BLOCK DIAGRAM INTERFACE TIMING DIMENSION OUTLINE POWER SUPPLY FOR LCD MODULE
Accepted by :
Proposed by : Date : 03,21,2002
REV : 6 PAGE : 1
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
www..com
RECORD OF REVISION
DATE
84.08.14 84.10.06
PAGE
11 4
SUMMARY
Page Change 5. ELECTRICAL CHARACTERISTICS LCD DRIVER CIRCUIT POWER SUPPLY VOLTAGE IDDVEE-VSS ALL CHANGE Change TEL,FAX,ADDRESS & COMP. 4.2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS. OPERATING TEMP. 40C50C. STORAGE SHOCK 490.0m/s2(50G) 49.0m/s2(5G) 5. ELECTRICAL CHARACTERISTICS. LCD DRIVER CIRCUIT POWER SUPPLY VOLTAGE VEE-VSS MIN -21.5----- TYP. -21.013.7 MAX -20.5 ----LOGIC CIRCUIT POWER SUPPLY CURRENT VEE-VSS= -21.0VVDD-VO=-18.7 IDD=5.07.0 IEE=4.05.3 RECOMMENDED LCD DRIVING VOLTAGE Ta=40C50C VDD-VO Ta=0C (19.5)(19.7) Ta=25C (19.0)18.7 Ta=50C (18.5)(17.7) ADD COLOR (CIE)FOR EL 6. OPTICAL CHARACTERISTICS CONTRAST RATIO K MIN. 1.4 ----TYP. 3 2.1 B MIN 4.0 ----TYP.----- 5.5 8.1 INTERFACE TIMING T62.5 s71 s 200XT200*T 9.2 DISPLAY PATTERN ADD TOLERANCE 10. POWER SUPPLY FOR LCD MODULE VEE=-21.0V -18.7V CHANGE 10.1 POWER SUPPLY FOR EL CHANGE 10.2 POWER AND INTERFACE TIMING SEQUENCE (08)LCD TYPE ----- F-STN,B/W mode TRANSMISSIVE (08)LCD TYPE ----- F-STN,B/W mode TRANSFLECTIVE
85.11.05 2002,02,07
9,10, ALL 04
05
06
09 12 13
2002,03,20
03
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 2
www..com
3. GENERAL SPECIFICATIONS AND MECHANICAL DATA
3.1 GENERAL SPECIFICATIONS PLEASE REFER TO: "CUSTOMER ACCEPTANCE STANDARD SPECIFICATIONS (SP-10-001)". 3.2 THIS INDIVIDUAL SPECIFICATIONS IS PRIOR TO GENERAL SPECIFICATIONS. 3.3 MECHANICAL DATA (1) NUMBER OF DOTS -------------------------------- 320W*200H DOTS (2) MODULE SIZE -------------------------------------- 122.8W*79.0H*7.8+1.0 / -0.5 D mm (3) VIEWING AREA------------------------------------- 99.5W*63.0H mm (4) ACTIVE AREA -------------------------------------- 95.97W*59.97H mm (5) DOT SIZE --------------------------------------------- 0.27W*0.27H mm (6) DOT PITCH ------------------------------------------- 0.30W*0.30H mm (7) VIEWING DIRECTION ---------------------------- 6 O'CLOCK (8) LCD TYPE -------------------------------------------- F-STN,B/W mode TRANSFLECTIVE POSITIVE (9) EL COLOR ------------------------------------------- WHITE
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 3
www..com
4. ABSOLUTE MAXIMUM RATINGS
4.1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS. ITEM POWER SUPPLY FOR LOGIC POWER SUPPLY FOR LCD DRIVER INPUT VOLTAGE STATIC ELECTRICITY POWER SUPPLY FOR EL SYMBOL VDD-VSS VDD-VEE VI ----VEL fEL MIN. 0 0 VSS ------------MAX. 6.0 27.0 VDD 100 AC200 2.0 UNIT V V V V Vrms KHZ NOTE (1) fEL=1.0KHZ 60 SEC.MAX AC115 Vrms 60 SEC.MAX COMMENT
NOTE(1) : TEST METHOD AND CONDITIONS AFTER CHARGING UP 200 PF CAPACITOR BY STATED VOLTAGE , THE CAPACITOR IS CONNECTED WITH INTERFACE PINS OF THE MODULE. 4.2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS.
ITEM
AMBIENT TEMPERATURE
OPERATING MIN. 0 MAX. 50
STORAGE MIN. -20 MAX. 60
COMMENT
NOTE (2)
WITHOUT CONDENSATION
HUMIDITY VIBRATION SHOCK CORROSIVE GAS
NOTE (3) 4.9 m/s2 (0.5G) 29.4 m/s (3G)
2
NOTE (3) 19.6 m/s2 (2G) 49.0 m/s2 (5G)
10~300HZ XYZ DIRECTIONS 1 Hr.EACH 10 mSEC XYZ
DIRECTIONS 1 TIME EACH
NOT ACCEPTABLE
NOT ACCEPTABLE
NOTE(2) : Ta AT -20 : 48HR MAX. 60 : 168HR MAX. NOTE(3) : Ta 40 : 90% RH MAX. Ta 40 : ABSOLUTE HUMIDITY MUST BE LOWER THAN THE HUMIDITY OF 90%RH AT 40. (50% RH AT 50)
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 4
www..com
5. ELECTRICAL CHARACTERISTICS
ITEM SYMBOL LOGIC CIRCUIT POWER SUPPLY VDD-VSS VOLTAGE LCD DRIVER CIRCUIT POWER VEE-VSS SUPPLY VOLTAGE INPUT VOLTAGE VIH NOTE (1) VIL LOGIC CIRCUIT POWER SUPPLY IDD CURRENT NOTE(2) LCD DRIVER CIRCUIT POWER IEE SUPPLY CURRENT NOTE (2) RECOMMENDED LCD VDD-VO DRIVING VOLTAGE = 10 = 0 NOTE (3) DUIT = 1/200 FLM FREQUENCY fFLM THE POWER VEL SUPPLY FOR EL COLOR (CIE)FOR EL ---------CONDITION ---------MIN. 4.75 TYP. 5.0 MAX. UNIT 5.25 V
---------H LEVEL L LEVEL
VDD-VSS=5.0V VDD-VO=-18.7V
----0.8*VDD
-13.7
----VDD
0.8VDD
V V V mA
0 -----6.5
------
VDD-VSS=5.0V
VDD-VO=-18.7V
------
5.3
------
mA
Ta= 0 Ta= 25 Ta= 50 ---------fFL=400HZ
FEL=400Hz X VEL=100Vrms Y
---------------70 -----0.26 0.34
(19.7) (18.7) (16.7) 75 100 0.29 0.38
---------------80 -----0.32 0.42
V V V HZ Vrms
NOTE(1) : APPEND TO TERMINALS M , FLM , CL1 ,CL2 , DO ~ D3 NOTE(2) : THE DISPLAY PATTERN IS ALL "Q" NOTE(3) : RECOMMENDED LCD DRIVING VOLTAGE MAY FLUCTATE ABOUT 0.5V BY EACH MODULE
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 5
www..com
6. OPTICAL CHARACTERISTICS
Ta = 25C ITEM VIEWING ANGLE CONTRAST RATIO 2-1 K tr(rise) RESPONSE TIME tf(fall) THE BRIGHTNESS OF BACKLIGHTING SOURCE VDD = 5.0V SYMBOL CONDITION K= 1.4 = 10 = 0 = 10 = 0 = 10
= (*) 0
MIN. -----------------
TYP. 40 2.1 250 400
MAX. -----------------
UNIT deg. ----ms ms
NOTE 1,2 3 4 4
B
= 0 = 0
-----
5.5
-----
cd/m2
(* Under normal temperature and humidity in a dark room)
NOTE (1) : DEFINITION OF AND
Z (Normal) 2 1 eye
Y ( = 180 ) LCD X ( = -90 )
X ( = 90 )
EL BACKLIGHT
Y ( = 0 )
NOTE (2) : DEFINITION OF VIEWING ANGLE 1 AND 2
K Contrast Ratio 1<10 <2
1.4
1
2
Viewing Angle
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 6
www..com
NOTE (3) : DEFINITION OF CONTRAST"K" K= Brightness of non-selected segment (B2) Brightness of selected segment (B1) Brightness curve for selected segment Brightness(%)
B2
Brightness curve for non-selected segment
B1
Setpoint driving voltage NOTE(4) : THE DEFINITION OF OPTICAL RESPONSE
NON SELECTIVE State BRIGHTNESS
NON SELECTIVE
Selective State
State
100% 90%
tr (RISE TIME)
tf (FALL TIME)
NOTE (5) : POSITION OF LIGHT
VIEWING ANGLE EL LIGHT2 LCD 40 LIGHT1
SENSER
10%
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 7
www..com
7.BLOCK DIAGRAM
Y320
IC7
~
Y80
IC4
Y1
D3
D2
~
D1
LCD 320*200 DOTS
Y161 D0 D3
~ IC1
~ IC3
D0~D3 CL2
FLM
TIMMING CIRCUIT
VDD VSS VO VEE
CL1
POWER SUPPLY
VEL
EL BACKLIGHT
PAGE : 8 VEL REV : 6
X161
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
X200
X80
X1
www..com
8. TIMING CHARACTERISTICS
8.1 INTERFACE TIMING
62.5S T 71S CL1 T/80 CL2 X200 D3 D2 D1 D0
Y1 Y5 Y2 Y3 Y4 Y6 Y7 Y8
X1
Y317
X2
Y318
Y319
Y320
1.7us FLM
100ns
(Reduction) CL1 200*T FLM
~ ~
~ ~
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 9
www..com
8.2 TIMING CHARACTERISTICS
ITEN CL2 cycle time CL2 pulse width (H) CL2 pulse width (L) CL1 set up time (1) CL1 hold time (2) CLOCK rise/fall time Data set up time Data hold time FLM set up time FLM hold time SYMBOL tCYC tCWH tCWL tSCL1 tHCL1 tr , tf tDSU tDH tFS tFH MIN. 300 100 100 100 100 -------80 80 --------------TYP ----------------------------------------------------------------------MAX. -----------------------------------50 --------------200 200 UNIT ns ns ns ns ns ns ns ns ns ns
tr
tCWH
tf
CL1 tCWH tr tf tCWL CL2 tDSU tDH tSCL1 tHCL1
D
tCYC tFS tFH
FLM
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 10
www..com
15
13 14
13
1
1
9.OUTLINE DIMENSION
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 11
Unit: mm
SVALE : NTS NO SPECIFIED TOLERANCE : 0.5
www..com
9.1 INTERFACE PIN CONNECTION
PIN NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SYMBOL NC FLM CL1 CL2 VO VDD VSS VEE D0 D1 D2 D3 VSS VEL VEL LEVEL ------------H L H L H L ------------------------------------------------H/L H/L H/L H/L ------------------------------------FUNCTION ---------------------THE FLM SIGNAL INDICATING THE BEGINNING OF EACH DISPLAY CYCLE DISPLAY DATA LATCH DISPLAY DATA SHIFT OPERATING VOLTAGE FOR LCD DRIVING POWER SUPPLY FOR LOGIC CIRCUIT GROUND POWER SUPPLY FOR LCD DRIVING
DISPLAY DATA GROUND POWER SUPPLY FOR EL BACKLIGHT POWER SUPPLY FOR EL BACKLIGHT
9.2 DISPLAY PATTERN.
59.970.1
0.03
0.27
95.970.1
0.27
0.03 UNIT : mm SCALE : NTS NOT SPECIFIED TOLERANCE 0.01
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 12
www..com
10. POWER SUPPLY
VDD VSS VO VEE
LCD DRIVING VOLTAGE VDD-VO
VDD
LCD MODULE
VR
VEE (-18.7V)
VR : 10K ~ 20K 10.1 POWER SUPPLY FOR EL
100Vrms
EL
VEL 400Hz
10.2 POWER AND INTERFACE TIMING SEQUENCE
4.75V VDD
5V 0 ~ 50ms Valid data 0 ~ 50ms 0 ~ 50ms 0 ~ 50ms
4.75V VDD
Signal
Signal
VEE
VEE
-18.7V
POWER ON
POWER OFF
SOLOMON TECHNOLOGY CORPORATION TEL : 886-7-788-6800
DataSheet 4 U .com
FAX : 886-7-788-6806~8
LM6302FWE
REV : 6 PAGE : 13

▲Up To Search▲

Price & Availability of LM6302FWE

	To Download LM6302FWE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .